OOMOO™ Series

OOMOO™ 25 and 30 silicones are user-friendly with a 1:1 mix ratio by volume and low viscosity, eliminating the need for vacuum degassing. Suitable for simple mold shapes, they cater to both hobbyists and industrial users with Shore hardness ratings of 25A and 30A respectively.
Available in OOMOO™ Series
Product Cure Time Shore A Hardness Specific Gravity Specific Volume Color Tensile Strength Shrinkage Elongation At Break Hundred Percent Modulus Die B Tear Strength Useful Temperature Min Mixed Viscocity Mix Ratio By Volume Mix Ratio By Weight Pot Life Hundred Percent Modulus Color Die B Tear Strength Mixed Viscocity Useful Temperature Min Cure Time Pot Life Specific Volume Specific Gravity Mix Ratio By Weight Shrinkage Mix Ratio By Volume Tensile Strength Elongation At Break Shore A Hardness
OOMOO™ 30 6 h. 30 1.34 g/cc 20.6 cu. in./lb. Lavender 240 psi 0.0025 in. / in. 250 % 100 psi 40 pli -65 °F 4,250 cps 1A:1B 100A:130B 30 min. 100 psi Lavender 40 pli 4,250 cps -65 °F 6 h. 30 min. 20.6 cu. in./lb. 1.34 g/cc 100A:130B 0.0025 in. / in. 1A:1B 240 psi 250 % 30
OOMOO™ 25 75 min. 25 1.34 g/cc 20.6 cu. in./lb. Light Blue 240 psi 0.0025 in. / in. 250 % 100 psi 40 pli -65 °F 4,250 cps 1A:1B 100A:130B 15 min. 100 psi Light Blue 40 pli 4,250 cps -65 °F 75 min. 15 min. 20.6 cu. in./lb. 1.34 g/cc 100A:130B 0.0025 in. / in. 1A:1B 240 psi 250 % 25

Why buy at FormX?

Subscribe to our Newsletter

Receive €5,- discount on your first purchase!

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.